Ola Pessoal, o ESC em questão é esse
http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=2163
Estou com o seguinte problema: ele começa a aceleração do meio do stick pra frente, ou seja, só quando atinjo "meio motor" é que ele começa funcionar, mas não em potencia de meio motor, começa a startar mesmo.
Ja peguei o manual e setei o default dele e o problema continua. Será que deu defeito? Alguém já teve um problema semelhante?
Desde já, agradeço a ajuda.
Problemas com ESC Turnigy Plush 25A
-
- membro
- Mensagens: 95
- Registrado em: Qui Jul 05, 2007 3:15 pm
- Localização: Piracicaba,SP
Problemas com ESC Turnigy Plush 25A
Se quer aprender mais.... volte ao início.
- GRANATO
- membro
- Mensagens: 2220
- Registrado em: Sex Nov 11, 2005 4:18 pm
- Localização: Birigui-SP (49) 16200-335
Às vezes é apenas problema na gravação do "range" de aceleração.
Experimente ligar com o stick no máximo e, ao primeiro "bip-bip-", retorne o stick à posição zero (inicial).
Segundo o manual dele:
Switch on Connect battery
transmitter, pack to ESC,
move throttle and wait for
stick to lop about 2 seconds
"Beep-beep-" tone
Move throttle stick to the A long "Beep-" tone should
should be emitted,
bottom, several "beep-" tones be emitted, means lhrottle
means throttle range
highest point has been
should be emitted, presenting range lowest point has
correctly confirmed the quantity of battery cells been correctly confirmed
Experimente ligar com o stick no máximo e, ao primeiro "bip-bip-", retorne o stick à posição zero (inicial).
Segundo o manual dele:
Switch on Connect battery
transmitter, pack to ESC,
move throttle and wait for
stick to lop about 2 seconds
"Beep-beep-" tone
Move throttle stick to the A long "Beep-" tone should
should be emitted,
bottom, several "beep-" tones be emitted, means lhrottle
means throttle range
highest point has been
should be emitted, presenting range lowest point has
correctly confirmed the quantity of battery cells been correctly confirmed
-
- membro
- Mensagens: 95
- Registrado em: Qui Jul 05, 2007 3:15 pm
- Localização: Piracicaba,SP
[quote:d6e224e54c="GRANATO"]Às vezes é apenas problema na gravação do "range" de aceleração.
Experimente ligar com o stick no máximo e, ao primeiro "bip-bip-", retorne o stick à posição zero (inicial).
Segundo o manual dele:
Switch on Connect battery
transmitter, pack to ESC,
move throttle and wait for
stick to lop about 2 seconds
"Beep-beep-" tone
Move throttle stick to the A long "Beep-" tone should
should be emitted,
bottom, several "beep-" tones be emitted, means lhrottle
means throttle range
highest point has been
should be emitted, presenting range lowest point has
correctly confirmed the quantity of battery cells been correctly confirmed[/quote:d6e224e54c]
Boa Granato, salvou meu ESC, muito obrigado pela ajuda. :D :!:
Valeu!!!!
Experimente ligar com o stick no máximo e, ao primeiro "bip-bip-", retorne o stick à posição zero (inicial).
Segundo o manual dele:
Switch on Connect battery
transmitter, pack to ESC,
move throttle and wait for
stick to lop about 2 seconds
"Beep-beep-" tone
Move throttle stick to the A long "Beep-" tone should
should be emitted,
bottom, several "beep-" tones be emitted, means lhrottle
means throttle range
highest point has been
should be emitted, presenting range lowest point has
correctly confirmed the quantity of battery cells been correctly confirmed[/quote:d6e224e54c]
Boa Granato, salvou meu ESC, muito obrigado pela ajuda. :D :!:
Valeu!!!!
Se quer aprender mais.... volte ao início.
-
- membro
- Mensagens: 260
- Registrado em: Dom Ago 21, 2011 4:44 pm
- Localização: Sobradinho DF